三维网技术论坛 - Powered by Discuz! Board

标题: [推荐] 量具量仪英文汇总（很全，持续更新中） [打印本页]

作者: 南巡不讲话 时间: 2008-7-29 16:05 标题: 量具量仪英文汇总（很全，持续更新中）

1.刀口型直尺:knife straigjht edge
2.刀口尺: knife straigjht edge三维网技术论坛/ e) K! }5 ^. K0 n8 g" t$ [2 \
3.三棱尺three edges straigjht edge
4.四棱尺four edges straigjht edgewww.3dportal.cn( B/ _7 y% F- K' }7 _
5.条式和框式水平仪三维网技术论坛1 C) y; D5 p9 y
bar form and square levels
6.合像水平仪 imaging level meter三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa$ S, |* n+ [) Y/ R
7铸铁平板 cast iron surface plate三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江& R  P( G& A+ H  E5 l
8.岩石平板 granite surface platewww.3dportal.cn) E8 R! e' t# i
9.铸铁平尺cast iron straigjht edge三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江" \8 S- f8 s# L, f9 z+ _1 m+ U; y6 N
10.钢平尺和岩石平尺三维网技术论坛+ D- |8 g; `' {$ F; R6 @
steel and granite straigjht edge
11.圆度仪 roundness measuring instrument三维网技术论坛, C& ]: y. C0 B, z+ s0 Q
12.电子水平仪electronic level meter
13.表面粗糙度比较样块铸造表面 roughness comparison specimens cast surface三维网技术论坛' \# C/ G! L8 S# {( [$ k! j
14.表面粗糙度比较样块磨、车、铣、插及刨加工表面三维网技术论坛; p% d; p$ T% N4 o, L
roughness comparison specimens-ground,turned,bored,milled,shape and planed
15.表面粗糙度比较样块电火花加工表面
roughness comparison specimens spark-erostion machining surfaces
16.表面粗糙度比较样块抛光加工表面三维网技术论坛+ j3 [* T6 z. F; H. i) ?- i4 a# X
roughness comparison specimens pollshed surfaces
17.接触式仪器的标称特性三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa& Z* F1 T8 I# X! @. D" T+ k: r
18.轮廓profileswww.3dportal.cn" S. f$ M$ r5 n
19.轨迹轮廓 traced profile
20.基准轮廓 reference profile三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江+ X1 q4 A4 c# l1 o  }6 G
21.总轮廓 total profile
22.原始轮廓 primary profile三维网技术论坛. B/ Y) P4 x  X# _5 D0 T
23.残余轮廓residual profile三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江; t- ~" ^7 c/ t2 b8 y/ `
24.触针式仪器stylus instrument
25.感应位移数字存储触针式量仪displacement sensitive,digitally storing stylus instrumentwww.3dportal.cn2 l  p$ W# ~( J8 G9 O
26.触针式仪器的部件stylus instrument components
27.测量环measurement loop
28.导向基准renfence guide
29.驱动器drive unit三维网技术论坛4 j* |+ j1 D" @/ i" X9 P' ]0 e
30.测头(传感器)probe(pick-up)三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa8 V* k9 u$ {: i/ H4 s+ o6 r+ i
31.拾取单元tracing element三维网技术论坛+ i8 j/ o% p3 t+ J  @
32.针尖stylus tip( D. Q1 Y, e' q3 A+ S
33.转换器transducer三维网技术论坛! i, J3 t7 Q8 y6 r5 @
34.放大器amplifier
35.模/数转换器analog-to-digital converter
36.数据输入data input
37.数据输出data output
38.轮廓滤波和评定profile filtering and evaluation
39.轮廓记录器profile recorder
40.仪器的计量特性metrological characteristics of the instrument三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江7 Q; F$ `! k1 _  |. Z  f0 y9 g( ], o
41.静测力的变化change of static measuring force
42.静态测力 static measuring force
43.动态测量力 dynamic measuring forcewww.3dportal.cn5 n: }% N$ V) t# E- |) w& F1 j
44.滞后hysteresis
45.测头的测量范围 transmission function for the sine waves$ }3 W$ m) s! M1 I: z0 B
46.仪器的测量范围measuring range of the instrumentwww.3dportal.cn$ I, K, d- D, x7 E6 v
47.模数转换器的量化步距quantization step of the ADC
48.仪器分辨力 instrument resolution三维网技术论坛: w4 r4 _$ v% I( l; c
49.量程分辨力比range-to-resolution ratio
50.测头线性偏差probe linearity deviation
51.短波传输界限short-wave transmission limitation
52.轮廓垂直成分传输 vertical profile component transmission

作者: 南巡不讲话 时间: 2008-7-30 14:20

53表面粗糙度比较样块抛丸、喷砂加工表面三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江' w9 F5 p$ |+ l" g8 T( i/ ^
roughness comparison specimens shot blasted and blasted surfaces
54产品结构几何量计术规范（GPS）geometrical product specifications(GPS)
55表面结构 surface texture
56接触式仪器的标称特性 nominal characteristics of contact instrumentswww.3dportal.cn5 _& y( [# |2 R& Y! p9 M
57公法线千分尺micrometer for mearsuring root tangent lenghths of gear teethwww.3dportal.cn2 }" V2 p. \* o# ?0 B
58最大允许误差 maximum permissible error
59圆柱直齿渐开线花键量规 gauges for straight cylindrical involute splines三维网技术论坛3 e5 P% V& J0 E. A7 f
60齿厚游标卡尺 Gear tooth vernier
caliperswww.3dportal.cn7 Z; @ Q) [5 s, y
61齿轮渐开线样板the involute master of gear
62齿轮螺旋线样板 the helix master of gear
63矩形花键量规 gauges for straight –sided splines
64测量蜗杆 master worm
65万能测齿仪 universal gear measuring instrument
66万能渐开线检查仪universal involute measuring instrument三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江& A5 {* ]; K" `7 s( L( y3 |/ t& B
67齿轮齿距测量仪gear circular pictch measuring instrument
68万能齿轮测量机 Universal gear measuring machine三维网技术论坛4 n; y R) `5 b
69齿轮螺旋线测量仪gear helix measuring instrument
70便携式齿轮齿距测量仪 manual gear circular pitch measuring instrument
71便携式齿轮基节测量仪manual gear base pitch measuring instrument
72立式滚刀测量仪vertical hob measuring instrument
73齿轮双面啮合综合测量仪Gear dual-flank measuring instrument三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa3 \3 R) v# O9 [( }
74齿轮单面啮合整体误差测量仪Gear single-flank meshing integrated error measuring instrument
75梯形螺纹量规 gauges for metric trapezoidal screw threads
76工作螺纹量规work gauges for metric trapezoidal screw threads 三维网技术论坛) u0 H- Z$ [4 x' ~6 F" g3 r
77校对螺纹量规check gauges for metric trapezoidal screw threads三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa5 R/ W; E4 k# O5 a1 s' R( |

[ 本帖最后由南巡不讲话于 2008-7-30 14:28 编辑 ]

作者: 南巡不讲话 时间: 2008-7-30 14:34

78.梯形螺纹量规型式与尺寸 Types and dimensions of metric trapezoidal screw threads/ E  |% g. b: T3 T5 F' w
79.普通螺纹量规型式与尺寸 Types and dimensions of gauges purpose screw threads
80.非螺纹密封的管螺纹量规 Gauges for pipe threads prcessure-tight joints are not made on the threads
81.螺纹千分尺www.3dportal.cn: Q3 D6 K/ l0 i9 f2 F3 b% a
Screw thread micrometer
82.最大允许误差 maximum permissible error
83.间隙螺纹量规 Clearance screw gauge
84.量针
Bar gauge三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江# ^: e2 S5 m0 P$ |$ L/ r& {$ |
85.螺纹样板 Screw thread template
86.用螺纹密封的管螺纹量规三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa1 u, G# S+ \: P8 H
Gauges for pipe threads where pressure-tight joints are made on the threadswww.3dportal.cn) a, t7 Z+ S* ~5 s
87.刀具预调测量仪  精度www.3dportal.cn6 F( U  `$ M* r) l
Accuracy of the presetting instrument
88.薄膜式气动量仪三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江- L5 U4 Y6 C2 n# }) b! u9 r
Membrane type pneumatic measuring instrument三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江; o2 w& m7 b. O5 `- G
89.光栅线位移测量系统
Grating linear displacement measuring system
90.光栅角位移测量系统三维网技术论坛0 a2 I1 L( s6 f; f. P; a3 D: U2 I3 o# y
Grating angular displacement measuring system
91.磁栅线位移测量系统
Magnet-grid linear displacement measuring system. f: F2 W3 p6 c$ f
92.量块附件
Accessories for gauge blocks
93.V形架
Vee blocks
94.比较仪座
Comparator stand三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa  ?- [! h  f# V& ?
95.磁性表座www.3dportal.cn1 b$ [4 l% Q4 j3 J) o! h- y' X  }4 [
Magnetic stand三维网技术论坛3 D1 o+ Z$ R* a4 ^; I: W# V- K
96.万能表座三维网技术论坛' f# @/ x! c0 B7 O9 {" j: C
Universal stand for dial indicator三维网技术论坛) k7 y- y& V1 u/ B6 h( V

作者: 南巡不讲话 时间: 2008-8-1 17:05

一般术语：
97.几何量 geometrical product
98.量值value(of a quantity)三维网技术论坛9 q  v) h. f! l/ |0 ?2 a
99.真值true value(of a quantity)- p: K$ e5 s2 [  k
100.约定真值 conventional true value(of a quantity)三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa8 p1 p7 F" J7 y
101.单位unit(of measurement)/ Z6 Z& v+ u# o& x. C
102.测量measurement
103.测试measurement and test三维网技术论坛/ r2 O9 y0 Y; _: H4 p0 G
104.检验inspecte三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa4 Q- n7 {: l' A* h* C! O% @" P" p
105.静态测量static measurementwww.3dportal.cn& U3 Q  P' ]7 x# x, R7 t. c1 ]
106.动态测量dynamic measurement
107.测量原理principle of measurement3 p/ _9 c% E0 {* A& H* {6 [
108.测量方法method of measurement
109.测量程序measurement procedure三维网技术论坛6 \) T) w0 e; x5 ?- \+ s* w
110.被测量measurand
111.影响量influence quantity
112.变换值transformed value(of a measurand)
113.测量信号measurement signal2 }0 p7 V7 o6 v- H3 R* P6 [
114.直接测量法direct method of measurement
115.间接测量法indirect method of measurement 三维网技术论坛5 A$ i; v: Y' f6 b0 C
116.定义测量法definitive method of measurementwww.3dportal.cn) ?+ G8 J( x' X* ]) h. y
117.直接比较测量法direct-comparison method of measurement
118.替代测量法substitution method of measurement三维网技术论坛& r. }) W: U$ h0 O  X; E2 q
119.微差测量法differential method of measurement三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江/ k8 g% C7 }, g4 L0 b9 \
120.零位测量法nulll method of measurement三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa. ?( t! @3 ?5 O
121.测量结果result of a measurement 三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江. u. P2 R- a  x6 s1 ]) i
122.测得值measured value
123.实际值actual value
124.未修正结果uncorrected result （of a measurement）
125.已修正结果corrected result(of a measurement)三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa! @9 M! _  v/ ~; ?
126测量的准确度accuracy of measurement
127.测量的重复性repeatability of measurement
128.测量复现性reproducibility of measurements三维网技术论坛3 R& n( k; l: k) g3 m8 |
129.实验标准偏差experimental standard deviation
130.测量不确定度uncertainty of measurement
131.测量绝对误差 absolute error of measurement
132.相对误差 relative error
133.随机误差random error7 }1 U! A/ Z% S
134.系统误差 systematic error三维网技术论坛, q0 t1 B* I2 g1 [% D1 ~7 ~3 Q: k
135.修正值correction三维网技术论坛1 Y0 C& o, @! p3 y+ y
136.修正系数correction factor0 }; r1 M3 y" i& C1 x8 ^2 {9 ?1 A" s
137.人员误差personal error三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江9 z; i( A1 a) I6 h$ H
138.环境误差environmental error三维网技术论坛. G  w3 n  W( b9 R
139.方法误差error of method
140.调整误差adjustment error
141.读数误差reading error三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa# `  _) s" t, f& I9 Q' k6 a
142.视差parallax error三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江7 _+ G) ]- R# `* ?0 P
143.估读误差 interpolation error三维网技术论坛: u8 A: I9 k: ]8 A& P2 U) D. k/ l
144.粗大误差parasitic error三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江% p4 v: S+ X8 Q% K; ]0 ?! v
145.检定verification
146.校准calibrationwww.3dportal.cn) y/ @# [- ?5 [9 h& p* e
147.调准gauging
148.调整adjustment三维网技术论坛8 J  q( ~! z% l& p

作者: 南巡不讲话 时间: 2008-8-2 10:11

几何量测量器具术语
4 M. N+ y! e) J% b' R
149.几何量具测量器具dimensional measuring instruments
150.长度测量器具length measuring instruments
151.角度测量器具angle measuring instruments
152.坐标测量机coordinate measuring machine三维网技术论坛% A2 \) r( \, b+ D
153.形状和位置误差测量器具form and position error measuring instruments三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江- d9 D9 b  X$ `; e' ]: N$ B
154.表面质量测量器具surface quality measuring instruments三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa/ W$ Z; ?3 E+ R4 I! l
155.齿轮测量器具gear measuring instruments三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江; {( ?3 P3 V! }/ V& U% a
156.实物量具（简称“量具”）material measure
157.测量仪器（简称“量仪”）measuring instrumentswww.3dportal.cn- r2 Q7 g- K- f' M' M
158.测量链measuring chain www.3dportal.cn$ w* @; W% `7 C3 z9 Y0 F, }
159.测量装置measuring system三维网技术论坛( z) }" w! _0 ~$ P: C! R- g8 h
160.指示式测量仪器indicating(measuring )instrument
161.记录式测量仪器recording（measuring）instrument三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa3 U$ n7 ~3 t4 d. s* t4 H1 v5 O
162.累计式测量仪器totalizing(measuring)instrument
163.积分式测量仪器integrating(measuring)instrument
164.模拟式测量仪器analogue(measuring)instrument
165.数字式测量仪器digital(measuring)instrument三维网技术论坛- s* g* M& m% D' p+ {7 e  Y
166.测量变换器measuring transducer三维网技术论坛  O6 B2 `* \% R( f2 A0 U
167.传感器sensor
168.指示装置indicating device
169.记录装置recording device
170.记录载体recording medium
171.标尺标记scale mark三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江" i0 o* {1 d8 L; h, b' I$ j0 g- v1 P
172.指示器index三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江4 B; D8 G3 x" ^' M
173.标尺scale
174.度盘dailwww.3dportal.cn' z( F8 p9 G" A8 K
三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa( R( p, S. X* F. ^
[ 本帖最后由南巡不讲话于 2008-8-2 10:16 编辑 ]

作者: 南巡不讲话 时间: 2008-8-4 09:44

175.标称值nominal valuewww.3dportal.cn. I5 h8 N, x. |+ q7 k
176.示值indication(of a measuring instrument)
177.标尺范围scale range
178.标称范围nominal range
179.标尺长度scale lengthwww.3dportal.cn/ L- v" x2 v- K9 g  e' N! V
180.标尺分度scale division
181.分度值value of a scale division 三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江( o6 v( H/ U, d3 o/ p
182.标尺间距scale spacing
183.线性标尺linear scale三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa6 `3 r" H/ x) ~
184.非线性标尺non-linear scale三维网技术论坛) P- F  ]) o! l" r  D6 @$ n
185.标尺标数scale numbering三维网技术论坛* P% h% E- y* V' Y5 Z0 S$ m" n8 _
186.测量仪器的零位zero of a measuring instrument三维网技术论坛7 ]2 L3 n. @* M, X1 A) w
187.量程span www.3dportal.cn, ^3 \5 R; Z+ z* X1 m: O& M8 f
188.测量范围measuring range
189.额定工作条件vated operating conditionswww.3dportal.cn" X5 R$ i' Y" d) K8 k" B* [! p
190.极限条件reference condition
191.标准条件reference condition
192.仪器常数instrument constant三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa) Y) E7 ?+ n! E1 Z7 k5 w7 b9 ~- i
193.响应特性response characteristic三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江3 u) M$ v' _! Z# n' ~  U, f: C
194.灵敏度senstivity三维网技术论坛, @0 _0 }4 M6 W; G: U7 o& \
195.鉴别力discrimination三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江4 `( a6 n( {# Z: k9 U
196.分辨力resolution（of an indicating device）三维网技术论坛& U$ i4 Q9 a. b2 E8 t) X
197.死区dead bandwww.3dportal.cn: U8 L: B2 e; y" I* h- R3 n" }' r
198.准确度accuracy of a measuring instruments三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江" i/ A) ?* O3 n) C7 ?4 O4 G
199.准确度等级accuracy class
200.重复性repeatability of a measuring instrument
201.示值变动性varation of indication
202稳定度stability
203.可靠性reliability
204.回程hysteresiswww.3dportal.cn* P: O# d  [' e
205.漂移driftwww.3dportal.cn* J5 ?1 q' j  I$ ]
206.响应时间response time
207.测量力（简称“测力”）measuring force
' q9 a! _; k9 Z: l$ p6 p2 m% @

作者: 南巡不讲话 时间: 2008-8-4 11:50

测量器具术语三维网技术论坛2 L! {  t# C- k& R+ j! N

1.
实物量具示值误差error of indication of a material measure三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa5 N5 _  n* n7 X/ N6 K, \3 [
2.
测量仪器示值误差error of indication of a measuring instrument  M# k- }# |' c( O
3.' }* w( [$ @) Q' |2 s  B
重复性误差repeatability error of a measuring instrument
4.
回程误差hysteresis error三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江8 |# l, F6 K- G5 c
5.www.3dportal.cn/ y! l4 F+ a- ~3 y9 x+ _
测量力变化variation of measuring force三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江6 _6 y/ a! L$ e  V8 Z! o* T
6.www.3dportal.cn2 o  M/ |/ _+ d1 `: d
测量力落差hysteresis of measuring force
7.三维网技术论坛3 ]6 G# L9 y$ q3 M9 x4 R( h
偏移误差bias error (of a measuring instrument)
8.三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa7 ?# z8 M+ K6 O/ e& a* _; }
允许误差maximum permissible errors(of measuring instruments)三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江5 \0 Z) }) u( B; Z, q* s
9.
跟踪误差tracking error (of a measuring instrument)
10.三维网技术论坛1 T: ?9 {2 ~$ y# x/ U& n
响应率误差response-law error (of a measuring instrument)三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa5 p4 p' s* e" O, U% [
11.三维网技术论坛) n3 N, k! A- }, Q
量化误差quantization error (of a measuring instrument)
12.三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa  Q, t, f! X- m  q7 C, ?
基值误差datum error (of a measuring instrument)
13.三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江, u& _. o' \+ ^# s; \/ f. L
零值误差zero error (of a measuring instrument)
14.
影响误差influence error三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa( ]" P6 o0 V! d7 D/ S! j1 C5 I( z
15.三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa' G  S- K3 @8 ]9 U) z* q) B7 O
引用误差fiducial errorwww.3dportal.cn( {7 u+ `% `- x$ r- Q# k
16.www.3dportal.cn- P, [3 k, z* G# }5 l1 N
位置误差position error三维网技术论坛' D" G; y9 m" U1 ^0 N1 L
17.三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江9 a( `% }) [7 g6 o+ c7 k4 V( @
线性误差linear error
18.. U' `" Q/ i  b% m! J5 }& L! c
响应特性曲线response characteristic curve
19.三维网技术论坛3 s2 S/ ]8 O7 G
误差曲线error curve
20.www.3dportal.cn  d$ p+ m" r, f2 m3 \# }2 u
校准曲线calibration curve' ?/ \9 c  g0 S# I
21.三维网技术论坛9 \% |2 O9 {6 W% @
修正曲线correction curve

作者: 南巡不讲话 时间: 2008-8-5 09:03

长度测量器具1 G9 F& {' V6 e- ^" x
量具类三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa) [. Z) {% ~: L% S" v3 k

1.
量块gauge block
2.三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa4 Y* {: i2 ~0 e7 U: o
光滑极限量规plain limit gauge三维网技术论坛. S& {( h/ f; H, }9 `4 L
3.# E0 }5 }$ L8 h2 e' P/ i2 P
塞规plug gauge
4.+ q) ], h" @  I& K" O6 S
环规ring gauge 三维网技术论坛2 h) p( f# t; \- \
卡规snap gauge三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江; M0 |6 d6 v3 `# K/ D0 R
5.三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa# W; @# _& a1 i1 M# M# q. X
塞尺feeler gaugewww.3dportal.cn& Z  S% L. Y2 o5 U. I, a
6.三维网技术论坛8 G' b+ _0 j: |& i
钢直尺steel gauge
7.三维网技术论坛, x# b) E6 U8 t  A
精密玻璃线纹尺precision glass linear scale三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa7 W; S. q) O( I, Q. |; K: J
8.5 |) G; Y' {0 _. X7 @; E# `
精密金属线纹尺precision metal linear scale
9.三维网技术论坛# `; w$ t+ F# b1 e% I* `
半径样板radius template

作者: 南巡不讲话 时间: 2008-8-5 09:05

卡尺类www.3dportal.cn9 L! D5 Y; r, O4 h- u$ {

1.
游标卡尺vernier caliperwww.3dportal.cn( R: a* ]. o- @! D" f. n# y. o
2.三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa" T' ^0 W" g$ l! i" ]7 K
带表卡尺dial caliper三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa; N6 p/ P$ \8 R* |7 Q* x
3.三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江0 I* X, H7 N2 i/ q& h; L9 D
电子数显卡尺calliper with electronic digital display三维网技术论坛/ W+ s8 T X' `* t4 }0 L
4.三维网技术论坛, v) n+ q1 G R
深度标游卡尺depth vernier caliper三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa9 A; @# P9 u# [5 h( @- R
5.
电子数显深度卡尺depth caliper with electronic digital display
6.) [* D% ~. _5 j. k4 i1 v9 P
带表高度卡尺dial height calliper三维网技术论坛# W) ]7 G6 j3 P! y2 b# y
7.
高度游标卡尺height vernier caliper三维网技术论坛3 s1 z& B4 N. |1 m: g3 H1 x3 f6 m
8.三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江! x$ L$ B; ]- o2 w
电子数显高度卡尺height caliper with electronic digital display
9.三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa- E& _" A* K. e# w
焊接检验尺calliper for welding inspection

作者: 南巡不讲话 时间: 2008-8-6 10:25

千分尺类三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa9 U  m. w. j! K5 Q' i) J1 a4 q8 F

1.
测微头micrometer head三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江' e- v$ x, [) _0 {  u+ k
2.www.3dportal.cn0 n& U8 `6 c- @+ B
外径千分尺external micrometer三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江3 Y: v) A5 f# B) k; o. V/ w
3.
杠杆千分尺micrometer with dial comparator三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa% J  K) N" d2 P. H
4.三维网技术论坛* j3 c$ Q9 u8 x- i4 N5 p$ ]/ ?
带计数器千分尺micrometer with counter三维网技术论坛8 O: W' p# i% s4 p6 y8 ^& `
5.
电子数显外径千分尺micrometer with electronic digital display
6.
小测头千分尺small anvil micrometer三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江+ q1 \0 L$ h3 x& k( n9 y
7.三维网技术论坛# H) |, F& _5 l4 u5 m  O  Q
尖头千分尺point micrometer三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa9 _, a2 R) s" v* c
8.www.3dportal.cn$ ^7 y- |! J# }* H' `1 ^: g- V
板厚千分尺sheet metal micrometer
9.www.3dportal.cn/ Z  q3 H3 c9 _! [7 W, f
壁厚千分尺tube micrometerwww.3dportal.cn. ?" ^+ z1 w& ?' Y( l! j5 }
10.
叶片千分尺blade micrometer三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa( v+ n" `$ V) y7 |8 P7 P
11.www.3dportal.cn6 x  [* D" y3 I0 P8 D) U- G
奇数沟千分尺odd fluted micrometer
12.三维网技术论坛5 M  }5 i0 u; t8 v. H7 Y% l" O& I
深度千分尺depth micrometer
13.
内径千分尺internal micrometer三维网技术论坛& f: k1 x$ \) s, K+ h
14.三维网技术论坛3 y4 H2 X2 {& j: B. N2 L' h( \
单杆式内径千分尺single-body internal micrometer
15.三维网技术论坛* ]0 T) [' K& c4 F# V5 |
表式内径千分尺 dail internal micrometer
16.
三爪式内径千分尺three point internal micrometer三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa- D3 P7 k$ ~" r4 o3 \6 h9 }
17.6 ?( r4 S  `' `" J. I
电子数显三爪式内径千分尺three point internal micrometer
18.
内测千分尺inside micrometer

作者: 南巡不讲话 时间: 2008-8-7 08:58

指示表类
三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa; g6 ~2 K+ J) Y( r
1.6 s( g0 }4 j7 q3 I9 ?3 h. I/ V
指示表 dial indicator0 z* j! c; n! K. K3 y- \
2.
深度只是表depth dial indicatorwww.3dportal.cn& o( q6 A- u1 S9 w' `
3.
杠杆指示表dial test indicator
4.
内径指示表bore dial indicator
5.三维网技术论坛! M: U$ g( Y5 Y: M
涨弹簧式指示表 expanding head bore dial indicator三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江+ m  `5 L3 {/ D, Y* U
6.
钢球式内径指示表ball type bore dial indicator: t3 i  A8 F& r1 v# D
7.
电子数显指示表dial indicator with electronic digital display
8.三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江" Z1 ?- @5 x2 f4 E0 j: v- j
杠杆卡规indicating snap gauge
9.& }' m% x: N& M5 k# e
带表卡规dial snap gaugewww.3dportal.cn* q3 Q  Q. E1 R  b3 C
10.
带表外卡规outside dial snap gauge
11.三维网技术论坛" b; L- b" V: G" k  X
带表内卡规inside dial snap gauge三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa' ]" q8 g) @0 A) Q- }1 t5 W
12.; R7 K2 N( f7 o+ r  [
测厚规thickness gauge
13.三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa3 j% B8 E: D7 }" c2 B" X' W6 }
扭簧比较仪microcator
14.
杠杆齿轮比较仪mechanical dial comparator# U9 S( b! W4 z* ~2 m$ A
15.三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江/ u& S- C6 e: Y2 W, J% Y8 \( T$ I
电子量规electronic gauge三维网技术论坛1 c, J2 u1 n2 U! c, X) D
16.三维网技术论坛; K: g4 L  I  C4 c' M
电感式传感器inductance type transducer三维网技术论坛& `6 i) K9 Z1 @. w8 O- }
17.三维网技术论坛8 u# b  Z: i' z6 D; w7 h
指示装置indicating devicewww.3dportal.cn1 C4 `+ e/ h7 W1 f
18.www.3dportal.cn3 O' m: N( S5 A  s# V( s' _& k
电感测微仪inductance micrometer
19.三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江: X6 W3 Z0 ]' K1 z
峰值电感测微仪peak inductance micrometer
20.
电感内径比较仪inductance bore comparator
21.2 r- r! e2 I5 g! P6 Z
瞄准传感器aiming transducer
资料来源：http://www.haoyuansz.com

作者: 南巡不讲话 时间: 2008-8-7 15:20

角度测量器具三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa) y$ Q: q1 o- P& P; g

1.0 d- U* N& T2 a$ r- a/ ?: x; J& P
角度块angle block gauge
2.
正多面棱体regular polygon mirror
3.三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa+ d0 r0 X6 h) Y$ b8 p
刀具角度样板cutter angular template
4.
直角尺square
5.三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa4 N: g+ D' I: R  R
平行直角尺parallel square三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa; Q* H1 W  v* o% U: S
6.三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa& G( K: e5 C' k5 k; A; j
宽座直角尺wide-stand square ) R7 r9 _! m8 f7 l# e0 W: Z
7.
刀口形直角尺edge square
8.www.3dportal.cn4 z1 W3 R: Y$ u8 g/ G- g" }
矩形直角尺square square
9.
三角形直角尺three angle square
10.
圆柱直角尺cylinder square
11.三维网技术论坛/ ^5 g, Q) N& i. ^$ W3 ?3 K
方形角尺square guage
12.
万能角度尺universal bevel protractor
13.
游标式万能角度尺vernier universal bevel protractor三维网技术论坛4 J" e4 B9 S& }7 M  o
14.三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江5 ^, H5 r' [2 p& i
表式万能角度尺dial universal bevel protractor三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa, I: V9 W$ x  ^+ p8 O/ l- K
15.$ i9 }, H! j" L5 K& b
光学分度头optical dividing head
16.三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江' L" M' v0 a: A1 \5 D
目镜式光学分度头optical dividing head with microscope reading三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江( R' t* N- r- I! M
17.
投影式光学分度尺optical dividing head with projection reading
18.
光电分度头optical-electronic dividing head
19.
多齿分度台multi-tooth division table三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa% E: `) r2 U4 N, s" V9 O" N
20.
分度转台division rotary table
21.
正炫规sine bar
22.三维网技术论坛1 Y  \, H" J- `7 K
普通正炫规general sine bar. K" N0 J/ N' P' }6 g. [& `) F6 ^" C
23.
铰链式正炫规hinge type sine bar
24.三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江9 N/ n3 ^1 ?6 f3 |! ~8 D4 o
双向正炫规dual-directional sine bar+ S1 g7 ^- V* ]) D) p
25.
圆锥量规cone gauge
26.
圆锥塞规plug cone gauge
27.三维网技术论坛* O9 \1 d% J  l' t5 p& {0 ?' @7 v
圆锥环规ring cone gauge三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa% x# O# D. V0 v
28.
直角尺测量仪square measuring instrument三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa7 ^; g2 i3 D" H  Q
资料来源：http://www.haoyuansz.com

作者: 南巡不讲话 时间: 2008-8-8 09:26

形位误差测量器具三维网技术论坛3 o) K  o& x) k; d4 h8 R! o
1.
平晶optical flat三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa8 l* d$ ~8 Q$ q4 `
2.
单面平晶optical flat
3.三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江* ^! Q/ {; z# G& L0 [! W
双面平晶parallel optical flat三维网技术论坛3 h* c7 d& R" O6 G+ E6 k
4.
刀口形直尺knife straight edgewww.3dportal.cn9 S! O7 I5 I9 k1 H
5.三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa' L- a- g1 k7 Y" b- w/ ~: a# V# ^& _
刀口尺knife straight edge
6.
三棱尺three edges straight edge
7.三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江% E! n4 t& Y( p: T2 j. e
四棱尺four edges straight edge- o# H( u7 w) m# N$ J( M
8.
平尺straight edge三维网技术论坛. d' j, b, B! @  `6 E! c
9.
矩形平尺square straight edge
10.
工字形平尺i-beam straight edge
11.www.3dportal.cn2 X) ?* J0 p& \5 \- H. S
角形平尺angle straight edge* W8 d0 ~$ h3 R5 a% A2 @" B
12.www.3dportal.cn8 Z6 e% n" P8 M- G, F- C2 ^
桥形平尺bridge type straight edge三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa7 n. e2 D! C' G2 g0 [' g) Y" Y
13.
平板surface plate
14.三维网技术论坛/ H. X8 F) [/ t. \- U& N# K# E
铸铁平板cast iron surface plate三维网技术论坛, e% f' ^4 L( F
15.
岩石平板granite surface plate
16.
方箱square box
17.
水准器式水平仪level meter三维网技术论坛$ h% W( Y% H8 h5 A) X4 u. h
18.三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江! ^8 `/ W' i6 k5 Q9 t6 W
条式水平仪bar level meter三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa1 U  K& W. ]6 v& d) r$ i
19.www.3dportal.cn2 [) ^& z* P/ L- s& E/ ]
框式水平仪frame level meter
20.
合像水平仪imaging level meter
21.
光学倾斜仪optical inclinometer
22.
电子水平仪electronic level meter
23.www.3dportal.cn+ K6 a4 Y: l' y2 n! ~: k+ f2 n& K
指针式电子水平仪electronic level meter with indicator
24.三维网技术论坛- v7 r8 A2 [1 H9 F# s
数显式电子水平仪electronic level meter with digital display4 _( T2 r, K$ f
25.三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa( p* C5 p+ M8 R2 b/ o1 n, H, l
平直度测量仪straightness measuring instrument
26.
光学式平直度测量仪optical straightness measuring instrument三维网技术论坛& l+ H6 l% _0 w6 `3 c6 R3 v; O* \
27.三维网技术论坛1 E0 |; a1 p, Z
光电式平直度测量仪photoelectrical straightness measuring instrument
28.
圆度测量仪roundness measuring instrument三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa  X, z  b& Y% R3 ?$ L8 A8 C' }
29.& ?( N5 T  g" ^
转轴式圆度测量仪spindle-rotating type roundness measuring instrument5 p( _6 @* \* U# c( P! @- u0 w
30.三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江: W2 W$ [: ^1 \& a7 [
转台式圆度测量仪table-rotating type roundness measuring instrument
资料来源：http://www.haoyuansz.com

作者: 南巡不讲话 时间: 2008-8-11 11:20

表面质量测量器具表面粗糙度比较样块surface roughness comparison specimen 铸造表面粗糙度比较样块surface roughness comparison specimen for cast surface 磨、车、镗、铣、插及刨加工表面粗糙度比较样块surface roughness comparison specimen for ground,turned,bored,milled,shaped and planed surface 电火花加工表面粗糙度比较样块surface roughness comparison specimen for spark-erosion machined surface 抛（喷）丸、喷砂加工表面粗糙度比较样块surface roughness comparison specimen for shot blasted and grit blasted surface 抛光加工表面粗糙度测量仪portable surface roughness comparison specimen for polished surface 便携式表面粗糙度测量仪portable surface roughess measuring instrument 驱动箱driving box 台式表面粗糙度测量仪bench type surface roughness measuring instrument

作者: 南巡不讲话 时间: 2008-8-12 17:28

齿轮测量器具
三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江! G, i! h; g$ K% x- y' F
专用量具类三维网技术论坛% u, I+ a$ v, ~- ]) R( d! ^

1.三维网技术论坛" @" U3 S8 `5 i
测量齿轮master gear三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江, A( f6 X; X. V' A
2.www.3dportal.cn! M& G& ^3 @9 c8 X' @0 x' G
直齿测量齿轮master straight gear三维网技术论坛6 T/ k' C8 z# p5 I, L8 h* E. s  P# h
3.三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江0 S$ K1 z. F$ M) C0 t0 w
斜齿测量齿轮master helical gear三维网技术论坛2 p% V$ E2 K# b- o) j- D, N0 E7 t
4.
测量齿条master rackwww.3dportal.cn6 I4 ~5 F7 [! W8 x; o& p+ P; `5 T
5.
测量蜗杆master worm
6.- x* U3 _& t* X
单头测量蜗杆master worm with one thread
7.三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江. G( H& P2 x. G! [3 `% D+ T
双头测量蜗杆master worm with two threads
8.
三头测量蜗杆master worm with three threads
9.三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江1 T  @# w$ G3 D( }: {+ p& e
渐开线样板involute template
10.三维网技术论坛0 ^8 U5 f+ h4 N1 ]! M$ b
螺旋线样板helix template三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江+ \+ W0 r1 g1 ?& s( S: S! n# K
11.www.3dportal.cn6 ]4 c$ P# H( m9 ?) r* j; X8 O
齿厚游标卡尺gear tooth vernier caliper三维网技术论坛+ X& y1 ]. A" l  ~" e. k8 Y
12.
电子数显齿厚卡尺gear tooth caliper with electronic digital display三维网技术论坛4 m8 V# e; P; E1 Q4 t0 M
13.9 I0 J5 ~- U: p" m1 S" b  D. B! e
公法线千分尺gear tooth mivrometer
14.三维网技术论坛6 Z8 Z$ ], B2 ]4 k) V+ i5 g
杠杆公法线千分尺indicating gear tooth micrometer 三维网技术论坛; U& ^3 R" u7 T9 k! w7 Z) G
15.
正切齿厚规tangent gear tooth gauge三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江9 `; P/ @( d1 l
16.
矩形花键量规square spline gauge
17.
矩形花键塞规square spline internal gauge三维网技术论坛1 y3 |4 o" S9 p# G# t# {# b& X
18.三维网技术论坛% B! s7 K/ }/ t+ _  ^! d' a
矩形花键环规square spline ring gauge
19.
圆柱直齿渐开线花键量规straight cylindrical involute spline gauge三维网技术论坛8 M6 G* S5 i2 o$ P
20.三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江+ s+ D; q7 M" |: t
圆柱直齿渐开线花键塞规straight cylindrical involute spline internal gauge三维网技术论坛. l% ^: d2 ^; L1 T5 M
21.三维网技术论坛0 e. ^4 h/ t. E1 @" T* v* V& u
圆柱直齿渐开线花键环规straight cylindrical involute spline ring gauge
22.www.3dportal.cn4 i- M$ F; U: \( [. B
三角花键量规triangular spline gauge
23.
三角花键塞规triangular spline internal gaugewww.3dportal.cn, v' K# E* k4 _% ^% |% p
24.
三角花键环规triangular spline ring gauge
资料来源：http://www.haoyuansz.com

作者: 南巡不讲话 时间: 2008-8-14 09:09

单项误差测量仪类

1.www.3dportal.cn8 z' t9 J! p' K! R5 R
便携式齿轮齿距测量仪manual gear circular pitch measuring instrument三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa8 c9 L3 a. c, ?2 k  Q" ]
2.
上置式齿轮齿距测量仪portable gear circular pitch measuring instrument
3.
齿轮基节测量仪gear base pitch measuring instrument; @* ~0 n  I2 i" p
4.
齿轮跳动测量仪gear run-out measuring instrument三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa" t7 _6 K- K4 k0 Z  F5 x
5.
齿轮螺旋角测量仪gear helix angle measuring instrument三维网技术论坛0 j" S  ^( V6 o: c
6.三维网技术论坛% u5 k8 _$ L$ n9 m; T9 X1 H
齿轮导程测量仪gear lead measuring instrument
7.
单盘式齿形测量仪disc type tooth profile measuring instrument8 K/ ^- a* S/ E( b: r. }1 w2 B, y/ w
8.三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江7 u! F+ V5 V9 s8 ?
基圆盘base circle plate
9.三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江" n3 Q( Q  @/ Y* J" w
分级单盘式齿形齿向测量仪variable single disc tooth www.3dportal.cn2 w# X+ \! }) B( p' c/ E
10.
万能式齿形测量仪universal tooth profile measuring instrument
11.
万能测齿仪 universal gear measuring instrument
12.
齿轮齿向测量仪gear tooth directional measuring instrument三维网技术论坛. d  ^1 E1 q! e
13.
齿轮齿距测量仪gear circular pitch measuring instrument
14.三维网技术论坛) R+ a9 B1 A+ v1 v3 v& z5 \. u
万能渐开线螺旋线测量仪universal involute & helix measuring instrument
15.三维网技术论坛4 \& }3 n5 P5 l, e
齿轮测量机 gear measuring machine三维网技术论坛) J7 k6 g# ]9 q7 d4 r
16.www.3dportal.cn- s% j" P& z" p2 A" @; h& W
涡轮测量仪worm wheel measuring instrument

作者: 南巡不讲话 时间: 2008-8-15 09:06

综合误差测量仪类
www.3dportal.cn6 o3 q5 F- E3 J& E6 \
1.三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江  x7 W6 R' l5 d4 L- x0 ~
圆锥齿轮双面啮合综合测量仪bevel gear dual-flank meshing measuring instrument
2.三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa! }0 k$ Y  p" E
圆柱齿轮双面啮合综合测量仪cylindrical gear dual-flank meshing measuring instruement三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江. A. K. f! K2 o% I  _: u
3.www.3dportal.cn3 i4 u! a8 v( g( P/ I$ b
圆锥齿轮单面啮合测量仪bevel gear single-flank meshing measuring instrument三维网技术论坛$ Z2 q/ {4 K4 h; D. z! e& N/ P
4.三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa8 ?7 W# ^; H" k' {9 L( x0 N
圆锥齿轮测量机bevel gear measuring machine三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa* ?- j& v. Q- B5 M- G: D
5.三维网技术论坛2 ~% A8 ?* [# w7 n
齿轮单面啮合整体误差测量仪gear single-flank meshing integrated error measuring instrument三维网技术论坛  X0 c: w+ @6 t# f+ K/ r1 _. E% H
6.
齿轮测量中心gear measuring center三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江' ]) \* p6 R4 c

作者: 南巡不讲话 时间: 2008-8-19 10:10

滚刀测量仪类 1. 立式滚刀测量仪vertical hob measuring instrument 2. 卧式滚刀测量仪horizontal hob measuring instrument 三维网技术论坛( d8 t; x0 I( B/ {; [8 F$ ?
螺纹测量器具

1.
螺纹样板screw thread template三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江% R6 M8 {4 z9 _) y+ y
2.三维网技术论坛$ D7 \. B4 Q+ J4 A3 {1 d  p
量针bar gauge
3.- r2 S* c. q, Q$ f3 q/ P! A
螺纹量规screw thread gaugewww.3dportal.cn* W0 |7 R3 t$ X0 D7 h
4.三维网技术论坛8 q5 m  \& ~$ q
螺纹塞规screw thread plug gauge
5.三维网技术论坛/ }! m% A5 s, A
螺纹环规（卡规）screw thread ring gauge (screw thread caliper gauge)三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa; f) L5 e% _8 z+ u+ \: c7 J- L
6.
螺纹千分尺screw thread micrometerwww.3dportal.cn5 v8 ~7 L9 \+ h6 H1 k1 [
7.三维网技术论坛0 F3 W6 `5 D/ h
带计数器螺纹千分尺screw thread micrometer with counter
8.0 M. `( `& X6 h2 x& j' ]
丝杠静态测量仪static lead screw measuring instrument
9.三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa  x4 J: p0 j& O! V& p* Y! ^- r) G( o
丝杠动态测量仪dynamic lead screw measuring instrument

作者: 南巡不讲话 时间: 2008-8-20 16:05

其他测量器具
& P9 i  k& r; r* g
1.  g6 `& M* q3 Q
双界限电接触传感器dual-limit electric contact transducer
2.
测微高度规micrometer height gaugewww.3dportal.cn* u- k3 O' R3 F) y
3.
表式高度规dial height gauge
4.
电子数显高度规height gauge with electromic digital displaywww.3dportal.cn9 y6 k% M1 V- p  K
5.
电子数显高度测量仪height measuring instrument with electronic digital display三维网技术论坛5 B# o. Q* J! ^) r
6.
大直径测量仪long diameter measuring instrument* k+ _9 N8 `+ a( J/ o
7.
光栅式传动链测量仪grating transmission chain measuring instrument
8.
惯性式传动链测量仪inretial transmission chain measuring instrument三维网技术论坛2 C- ^. X* M2 _9 a9 W5 U# `
9.www.3dportal.cn* H* d8 H1 J6 p& ], `& k- r
外圆磨加工主动测量仪active measuring instrument for cylindrical gringding三维网技术论坛' U& W0 _2 i, X8 U+ J; i& y
10.三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa0 E  O8 ?, {0 ^7 u
测量装置measuring device
11.
指示控制器indicating controller
12.
内圆磨加工主动测量仪active measuring instrument for internal grinding
13.
立式刀具预调测量仪vertical tool presetting and measuring instrument
14.三维网技术论坛' d7 E3 i! H5 z; }( ^* j. P
卧式刀具预调测量仪horizontal tool presetting and measuring instrument
15.三维网技术论坛& {6 F" A1 g. U/ P3 R: L0 K# w
自动分选机automatic sorting machine
16.
测量装置measuring device
17.
执行机构executing mechanism
18.
自动检验机automatic testing machine
19.
三坐标测量机three coordinate measuring machine三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江; m( ]) g5 y8 a
20.
触发式传感器touching sensor
21.
扫描式传感器scanning sensor
资料来源：http://www.haoyuansz.com

作者: 南巡不讲话 时间: 2008-8-21 14:18

测量链www.3dportal.cn& I( `5 {% m1 ^8 O- n0 a# ^9 p
1.
光栅线位移测量链grating linear displacement measuring chain
2.
光栅线位移传感器grating linear displacement transducer三维网技术论坛- D( }" q7 A1 G0 K. d
3.
光栅数显表grating digital display meter
4.' y7 ?( A3 G/ D  g6 d
光栅角位移测量链grating angular displacement measuring chainwww.3dportal.cn6 Q. b( \' R4 g9 f$ j% ?
5.
光栅角位移传感器grating angular displacement transducer三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江% z+ q' f/ l4 A
6.三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa1 O/ t2 m, R. \1 n
磁栅线位移测量链magnet-grid linear displacement measuring chain三维网技术论坛+ E! [. D4 L0 Y/ s
7.三维网技术论坛. i, E. }0 H* b: X- e1 G
磁栅线位移传感器magnet-grid linear displacement transducer
8.
磁栅数显表magnet-grid digital display meter三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江2 `7 w! [* ^$ x% C4 n6 a( j
9.
磁栅角位移测量链magnet-grid angular displacement measuring chain三维网技术论坛/ d! g0 Q5 f. M( y1 ^' t3 o
10.
磁栅角位移传感器magnet-grid angular displacement transducer3 \7 w, w+ B) {" k8 ]# L  H2 ?; z
11.www.3dportal.cn# v' L0 ~: F* _% T7 s
容栅线位移测量链capacitance linear displacement measuring chain# a9 d- D! P* G) G
12.+ F& c2 [2 u3 ?4 ~6 F( {3 l
容栅线位移传感器capacitance linear displacement transducer
13.
容栅数显表capacitance digital display meter
14.www.3dportal.cn3 m  s& O  A) Z4 Q8 d3 X" p
容栅角位移测量链capacitance angular displacement measuring chain$ V5 X5 w; w; J. G9 q
15.
容栅角位移传感器capacitance angular displacement transducer
16.
感应同步器线位移测量链linear displacement synchro-inductosyn measuring chain9 K4 ?$ h) I7 P; ^
17.www.3dportal.cn9 _7 T3 q1 S! |' F& x: u
线位移感应同步器linear displacement synchro-inductosyn" G; H0 x+ l6 V0 ]4 @( p: W# R
18.
感应同步器数显表synchro-inductosyn digital display meter
19.www.3dportal.cn3 g# t/ k6 ]- s/ k' e2 F
感应同步器角位移测量链angular displacement synchro-inductosyn measuring chain
20.三维网技术论坛7 z: T$ u8 @  U+ s5 T/ ]
角位移感应同步器angular displacement synchro-inductosyn
21.
浮标式启动测量链float type pneumatic measuring chain
22.
气动传感器pneumatic transducer
23.
浮标式气动指示器pneumaticindex三维网技术论坛, v' ~# c8 K; H+ A: E/ g2 P
24.
水柱式气动测量链water-column type pneumatic index三维网技术论坛) @" [" n8 @9 L( ]
25.三维网技术论坛0 a$ j4 \. U/ p
波纹管式气动测量链bellows type pneumatic measuring chain1 u7 ^* c$ T5 @+ q
26.
波纹管式气动指示器bellows type pneumatic index三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江* B3 |8 [3 V. X1 M& ]8 |
27.三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa( K# d6 _8 m- @; K# C% l5 f
薄膜式气动测量链membrane type pneumatic measuring chain三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa4 L( \, U6 S6 N( f
28.
薄膜式气动指示器membrane type pneumatic index% h5 t" m: S8 ~& x, S/ U- q7 r
29.三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江+ i* J' \. ?5 ]' ?) T; W
双频激光干涉测量链dual-frequency laser interferometring chain
30.
激光头laser head
资料来源：http://www.haoyuansz.com

作者: 南巡不讲话 时间: 2008-8-22 15:33

通用器件及附件三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江5 z9 o: A" E6 r6 Z, [1 ?7 K' h
# O" W( u, s1 Y" t3 T) W6 Y- k
1.三维网技术论坛" k, x4 T; X" f
万能表座universal stand for dial indicatorwww.3dportal.cn2 }; ~9 i2 `) r
2.三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江. x& C" w" U6 Y. c* V
微调万能表座microstroke universal stand
3.三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江. L8 \1 ]7 J. Z, G
普通万能表座universal stand
4.
磁性表座magnetic stand
5.
微调磁性表座microstroke magnetic stand三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa# T' |$ V* g0 c; k; o( N5 C
6.三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江, H& a6 b' V4 A# a( o& K& Z
普通磁性表座general magnetic stand
7.三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa, p5 N2 w+ k9 x
V-形架V-block
8.
测量台架measuring stand; f' d+ @5 V$ t: x' n& D
9.
微动测量台架microstroke measuring stand
10.2 [6 k, i9 n! w8 s/ p3 z* P
普通测量台架general measuring stand
11.
光柱显示器lingt-column display三维,cad,机械,技术,汽车,catia,pro/e,ug,inventor,solidedge,solidworks,caxa,时空,镇江- ]8 H7 l, P+ d
12. [$ ?8 \3 B3 P, w! G, o
气动放大器pneumatic magnifier
13.
气电转换器pneumatic-electronic signal transducer
14.
多点转换装置multi-point transfer device三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa3 K6 A) b$ v. O- R2 @% k
15.www.3dportal.cn3 j: J+ z; C9 a0 B. o6 D
继电控制装置relay control device
16.
通用记录器universal recorder0 |0 J, m( K1 Z( F, C4 N
17.
长圆图记录器linear and circular graph recorder
资料来源：http://www.haoyuansz.com

作者: 南巡不讲话 时间: 2008-8-26 10:08

轮廓法测量表面粗糙度的仪器www.3dportal.cn8 p, A6 v2 D; b+ U7 h
Indtrument for the measurement of surface roughness by the profile method
www.3dportal.cn$ i0 G; I: U; u3 G
1.
测量表面粗糙度的轮廓方法profile method of measurement of the surface roughness三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa* ^9 ]& m; ^$ t( t
2.( x! c! f9 r" e0 D  K$ Q
轮廓法测量表面粗糙度的仪器instrument for the measurement of surface roughness by the profile method三维网技术论坛3 k7 s0 B0 R" K9 x: R1 U0 \
3.
轮廓顺序转换的接触（触针）式仪器contact(stylus) instrument of surface roughness by the profile method三维网技术论坛! A# F+ i( ^/ z3 ~3 J
4.三维|cad|机械|汽车|技术|catia|pro/e|ug|inventor|solidedge|solidworks|caxa! u2 y  s' J' }: l  A# W
轮廓顺序转换的非接触式仪器contactless instrument of consecutive profile transformation
5.
轮廓瞬即转换的接触式仪器contact instrument of instantaneous profile transformation5 H! G+ B) m8 r( ^% u4 L- X. i3 r
6.
轮廓瞬即转换的非接触式仪器contactless instrument of instantaneous profile transformation三维网技术论坛2 d1 s; Q. N  l- Y& R" o3 A

欢迎光临三维网技术论坛 (http://www.3dportal.cn/discuz/)