ug后处理加入刀具信息判断错误

hirst126

global mom_tool_name mom_tool_type
global mom_tool_diameter mom_tool_corner1_radius mom_tool_flute_length
$ n; {, v6 ^, c$ fglobal mom_tool_length tip_angle mom_tool_point_angle RAD2DEG
  if ![ info exists mom_tool_corner1_radius ] { set mom_tool_corner1_radius 0 }
  if { $mom_tool_type == "Drilling Tool" } {
1 D6 ]  A- n3 o# [  set tip_angle [ expr $mom_tool_point_angle * $RAD2DEG ]
    MOM_output_literal";(D=[format "%.2f" $mom_tool_diameter]Tip angle=[format "%.2f" $tip_angle]
FL=[format "%.1f" $mom_tool_flute_length]L=[format "%.1f" $mom_tool_length])"
% P7 r3 V( f2 y8 Z, u2 I% P! Y } else {
    MOM_output_literal";(D=[format "%.2f" $mom_tool_diameter]R=[format "%.2f"
$mom_tool_corner1_radius]FL=[format "%.1f" $mom_tool_flute_length]L=[format "%.1f"
$mom_tool_length])"
! }5 V/ G5 o9 e: C- A" | }


9 x# L0 M# R) P加入如上刀具信息，出现错误，求高人解决。主要是想把铣刀和钻头区分开

张文汽车

刀具类型应该是Milling, Turning, Grooving, Drilling or Threading这里面的几种，不是你上面写的 "Drilling Tool"

fengyunhun

如果是计算最短刀长失败，可以判断加工类型，遇到加工类型为钻孔，给最短刀长赋值为0
$ n% Y; o, {1 w  yif {[string match "Point*" $mom_operation_type]} {set mom_tool_minimum_length 0}